BMW 2010 M3 Convertible Manuale Proprietario
65
1.
Switch on the ignition, refer to page
.
2.
Lightly push button
1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
bol appears in the display accompanied by
the word "SET".
3.
Press button
2.
4.
Use button
1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
sumption.
>
Fuel consumption: mpg, km/l,
l/100km
>
Distance covered: mls, km
>
Time: 12h, 24h format
>
Date: day.month dd.mm,
month/day mm/dd
>
Temperature:
7, 6
5.
Press button
2.
6.
Use button
1 to make the setting.
7.
Press button
2.
The setting is stored for the remote control
currently in use.
currently in use.
Resetting to factory settings
You can reset the settings for formats and units
of measure to the factory settings.
of measure to the factory settings.
1.
Lightly push button
1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
bol appears in the display accompanied by
the word "SET".
2.
Press button
2.
3.
Use button
1 to select "RESET".
4.
Press button
2 until
is displayed.
The settings are reset.
The setting is stored for the remote control
currently in use.
The setting is stored for the remote control
currently in use.
Service requirements
The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG