BMW 2009 M6 Coupe Manuale Proprietario

Climate

104

In the highest setting you activate the maximum
heating output, regardless of the outside tem-
perature.

Adjusting temperature in upper body

region

Press the button to display the current set-
ting on the Control Display.

Select the field by moving the controller and
turning the controller to adjust the temper-
ature.

You can also adjust the temperature in the
upper body region with iDrive.
iDrive, for operating principle refer to page

Open the start menu.

Open "Climate".

Select "Vent settings" and press the con-
troller.

Select the field by moving the controller and
turning the controller to adjust the temper-
ature.

Defrosting windows and removing
condensation

Quickly remove ice and condensa-
tion from the windshield and front
side windows.

To do this, also switch on the cooling function.

Rear window defroster

The rear window defroster
switches off after a while.
Convertible: the rear window

defroster is only activated when the rear win-
dow is closed.
Depending on the vehicle equipment, upper
wires are used as an antenna and are not part of
the rear window defroster.

Air volume, manual

You can adjust the air volume by
turning. You can reactivate the
automatic mode for the air volume
with the AUTO button.

The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The display stays the same.

Air distribution, manual

You can route the air flowing out into the vehicle
interior via various programs, separately for the
driver's and passenger's side:

Upper body region

Upper body region and footwell

Footwell

Driver's side: windows and footwell

Individual program

Selecting program

Press the button repeatedly until
the desired air distribution of the
respective program is shown on
the Control Display.

Adjusting air distribution individually –

individual program

Your settings are stored in this program.