BMW 2009 M6 Coupe Manuale Proprietario
227
Model with pressure gauge on hose*
3 Connector and cable for lighter socket
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation
pressure
8 Screw on pressure gauge for reducing tire
inflation pressure
9 Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
wheel
Connector, cable and connecting hose are
stored in the compressor housing.
stored in the compressor housing.
Model with pressure gauge integrated
in housing*
3 Connector and cable for lighter socket
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation
pressure
8 Button for reducing tire inflation pressure
9 Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
wheel
Connector, cable and connecting hose are
stored on underside of compressor.
stored on underside of compressor.
Using M Mobility System
To repair a flat tire with the M Mobility System,
proceed as follows:
proceed as follows:
>
Fill sealant into wheel, refer to page
227
.
>
Distribute sealant, refer to page
228
.
>
Produce tire inflation pressure, refer to
page
page
228
.
Filling sealant into wheel
Strictly comply with the specified order,
otherwise highly pressurized sealant
otherwise highly pressurized sealant
could escape.
<
1.
Shake sealant bottle.
2.
Screw hose
9 onto connection of sealant
bottle.
3.
For model with pressure gauge on hose:
Make sure that screw
Make sure that screw
8 on pressure gauge
is closed.
4.
Screw dust cap off valve of defective wheel
and screw filling hose
and screw filling hose
2 of sealant bottle
onto valve.
5.
Insert sealant bottle on compressor hous-
ing so that it is positioned upright.
ing so that it is positioned upright.
6.
Make sure that the device is switched off,
position 0.
position 0.
7.
Insert connector
3 into lighter socket in
vehicle interior, refer to page
8.
With the ignition switched on, refer to
page
page
:
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG