BMW 2008 328i Sedan Manuale Proprietario
E
ve
ryth
ing un
de
r co
nt
rol
76
2 Button for:
>
Confirming selected display or set val-
ues
ues
>
Calling up computer information
3 When the lights are on: instrument lighting
brightness
4 Calling up Check Control
5 Checking engine oil level
6 Setting the time
7 Setting the date
8 Viewing service requirement display
Exiting displays
The outside-temperature reading and the time
reappear when you press button
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
required, complete the current setting first.
Units of measure
You can set units of measure.
iDrive, for operating principle refer to page
iDrive, for operating principle refer to page
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Language / Units" and press the
controller.
controller.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
6.
Select the desired menu item and press the
controller.
controller.
7.
Select the desired measurement unit and
press the controller.
The setting is stored for the remote control
currently in use.
press the controller.
The setting is stored for the remote control
currently in use.
Service requirements
The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
The extent of service work required can
be read out from the remote control by
be read out from the remote control by
your BMW Service Advisor.
<
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster.
view the respective distance remaining or due
date individually in the instrument cluster.
1.
Switch on the ignition, refer to page
.
2.
Push button
1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
3.
Press button
2.
Online Edition for Part no. 01 41 0 014 254 - © 08/07 BMW AG