BMW 2007 650i Convertible Manuale Proprietario
![BMW](https://files.manualsbrain.com/attachments/59bff3c21d02c686320f922a23b4f0fd8e167e8d/common/fit/150/50/d22aabf2d062b824edd261b72ebf0e854c720c7e6ff4ab10933d93100f3a/brand_logo.png)
Practical interi
or
acc
ess
orie
s
112
Practical interior accessories
Integrated universal remote
control*
The concept
The integrated universal remote control can
replace as many as three hand-held transmit-
ters for various remote-controlled accessories,
such as garage and gate or lighting systems.
The integrated universal remote control regis-
ters and stores signals from the original hand-
held transmitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons
replace as many as three hand-held transmit-
ters for various remote-controlled accessories,
such as garage and gate or lighting systems.
The integrated universal remote control regis-
ters and stores signals from the original hand-
held transmitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons
1. After this, the programmed
memory button
1 will operate the system in
question. The LED
2 flashes to confirm trans-
mission of the signal.
If you sell your vehicle one day, delete the saved
programs beforehand for your own security,
refer to page
If you sell your vehicle one day, delete the saved
programs beforehand for your own security,
refer to page
113
.
To prevent possible damage or injury,
before programming or using the inte-
before programming or using the inte-
grated universal remote control, always inspect
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.
<
Checking compatibility
If you see this symbol on the packaging
or in the manual supplied with the orig-
inal hand-held transmitter, it is safe to
or in the manual supplied with the orig-
inal hand-held transmitter, it is safe to
assume that it is compatible with the integrated
universal remote control.
universal remote control.
If you have additional questions, please
contact your BMW center or call:
contact your BMW center or call:
1-800-355-3515.
Information is also provided on the Internet at:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark of
Johnson Controls, Inc.
Information is also provided on the Internet at:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark of
Johnson Controls, Inc.
<
Programming
1 Memory buttons
2 LED
2 LED
Fixed-code hand-held transmitters
1.
Switch on ignition, refer to page
.
2.
When using for the first time: press the left
and right-hand memory button
and right-hand memory button
1 for approx.
20 seconds until the LED
2 flashes quickly.
All stored programs are deleted.
3.
Hold the original hand-held transmitter at a
distance of approx. 4 in/10 cm to 12 in/
30 cm from the memory buttons
distance of approx. 4 in/10 cm to 12 in/
30 cm from the memory buttons
1.
The required distance between the
hand-held transmitter and the mem-
hand-held transmitter and the mem-
ory buttons
1 depends on the particular
system of the original hand-held transmitter
used.
used.
<
4.
Simultaneously press the transmit key on
the original hand-held transmitter and the
desired memory button
the original hand-held transmitter and the
desired memory button
1 on the integrated
universal remote control. The LED
2 flashes
slowly at first. As soon as the LED
2 flashes
rapidly, release both buttons. If the LED
2
does not flash rapidly after approx. 15 sec-
onds, alter the distance and repeat the step.
onds, alter the distance and repeat the step.
5.
To program other original hand-held trans-
mitters, repeat steps 3 and 4.
mitters, repeat steps 3 and 4.
The corresponding memory button
1 is now
programmed with the signal of the original
hand-held transmitter.
You can operate the device when the engine is
running or when the ignition is switched on.
hand-held transmitter.
You can operate the device when the engine is
running or when the ignition is switched on.
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG