Brother FAX-1020E Manuale Utente
PREP
ARA
TION
AND SIMPLE USE
Preparation and Simple Use Guide
2
5
Setting the Document
■ Documents must be between 14.8 and 21.6 cm wide, and 15 and 60 cm long. Your fax
machine can only scan an image 20.8 cm wide, regardless of how wide the paper is.
■ Make sure you insert documents face down, top edge first.
■ Adjust the paper guides to fit the width of your document.
■ Adjust the paper guides to fit the width of your document.
■ The Automatic Document Feeder can hold up to 20 pages, feeding each one individually
through the fax machine. Use standard (64 gsm~90 gsm) paper when using the Automatic
Document Feeder; if you are using heavier paper, feed each sheet individually to prevent
paper jams.
Document Feeder; if you are using heavier paper, feed each sheet individually to prevent
paper jams.
■ Press Resolution (before you send the fax) to select the resolution for the document you are
sending. If you wish to send in STANDARD resolution, i.e. a general fax with no graphics,
then the default is STANDARD, and the resolution button need not be pressed. (See
Resolution, page 18)
then the default is STANDARD, and the resolution button need not be pressed. (See
Resolution, page 18)
•
DO NOT use, curled, wrinkled paper, folded, ripped paper, or paper with
staples, paper clips, paste, or tape attached.
staples, paper clips, paste, or tape attached.
•
DO NOT use, cardboard, newspaper, or fabric.
•
DO NOT use paper on which correction fluid has been used.
•
Make sure documents written with ink are completely dry.
6
Sending a fax automatically
Insert the document face down in the Automatic Document Feeder.
Enter the fax number you want to call.
Press Fax Start.
IMPORTANT: Do not pick up the handset.
IMPORTANT: Do not pick up the handset.
Paper Guides
1
2
3