Braun EasyStyle SI 2010 Manuale Utente
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you enjoy your new Braun steam iron.
standards of quality, functionality and design. We
hope you enjoy your new Braun steam iron.
Important safeguards
•
Before using the iron, read the use instructions
completely. Keep the use instructions during the
entire life of the appliance.
completely. Keep the use instructions during the
entire life of the appliance.
•
Make sure your voltage corresponds to the
voltage printed on the iron.
voltage printed on the iron.
•
Always unplug the iron before filling with water.
Always pull the plug, not the cord.
Always pull the plug, not the cord.
•
The cord should never come in contact with hot
objects or the sole plate.
objects or the sole plate.
•
Never immerse the iron in water or other liquids.
•
The iron must be used and rested on a stable
surface.
surface.
•
During ironing pauses, always place the iron
upright on its heel rest and ensure that the heel
rest is placed on a stable surface.
upright on its heel rest and ensure that the heel
rest is placed on a stable surface.
•
The iron must not be left unattended while it is
connected to the mains supply.
connected to the mains supply.
•
Keep the iron away from children, especially
when using the Power shot function. Electric
irons combine high temperatures and hot steam
that could lead to burns.
when using the Power shot function. Electric
irons combine high temperatures and hot steam
that could lead to burns.
•
Never iron or dampen clothes while wearing
them.
them.
•
The iron is not to be used if it has dropped, if
there are visible signs of damage or if it is
leaking. Regularly check the cord for damage.
there are visible signs of damage or if it is
leaking. Regularly check the cord for damage.
•
If the appliance (including cord) shows any
defect, stop using it and take it to a Braun
Service Centre for repair. Faulty or unqualified
repair work may cause accidents or injury to the
user. Braun electric appliances meet applicable
safety standards.
defect, stop using it and take it to a Braun
Service Centre for repair. Faulty or unqualified
repair work may cause accidents or injury to the
user. Braun electric appliances meet applicable
safety standards.
A Description
1
Spray nozzle
2
Water tank opening
3
Steam regulator
4
Spray button
5
Power shot button
6
Temperature selector
7
Pilot light
8
Heel rest
B Before starting off
This iron is designed for tap water. If you have
extremely hard water, we recommend that you
use a mixture of 50 % tap water and 50 %
distilled water. Fill the water tank to «max»
marking. Never use distilled water exclusively.
Do not add any additives (e.g. starch).
extremely hard water, we recommend that you
use a mixture of 50 % tap water and 50 %
distilled water. Fill the water tank to «max»
marking. Never use distilled water exclusively.
Do not add any additives (e.g. starch).
•
Before filling with water, turn off the steam
regulator («0» = steam off).
regulator («0» = steam off).
•
Holding the iron slightly inclined (as shown in B),
fill the water tank up to the «max» marking.
fill the water tank up to the «max» marking.
•
Place the iron upright on its heel rest and
connect it to the mains.
connect it to the mains.
Select the temperature according to the ironing
guide on the heel rest of the iron or on the label
in your garments.
The pilot light (7) goes off when the desired
temperature is reached (after approx. 1
guide on the heel rest of the iron or on the label
in your garments.
The pilot light (7) goes off when the desired
temperature is reached (after approx. 1
1
/
2
min.).
C Ironing
1 Vario steam
You can select the steam quantity using the
steam regulator (3).
steam regulator (3).
(0= no steam,
= maximum steam).
Notice: While ironing, do not turn the steam
regulator beyond
regulator beyond
.
The temperature selector (6) has to be set within
the red range (between «••» and «max»).
the red range (between «••» and «max»).
Preconditioning
(only with model SI 2040)
Steam also develops horizontally at the front
area of the sole plate. This preconditions the
textiles by «pre-steaming», thus making ironing
easier.
Be careful – steam comes out laterally.
(only with model SI 2040)
Steam also develops horizontally at the front
area of the sole plate. This preconditions the
textiles by «pre-steaming», thus making ironing
easier.
Be careful – steam comes out laterally.
2 Power shot
Prior to use, press the Power shot button (5)
3 to 4 times to activate it.
Press the Power shot button in intervals of at
least 5 seconds.
Power shot can be activated when dry ironing.
The temperature selector has to be within the
solid red range (between «•••» and «max»).
3 to 4 times to activate it.
Press the Power shot button in intervals of at
least 5 seconds.
Power shot can be activated when dry ironing.
The temperature selector has to be within the
solid red range (between «•••» and «max»).
Models SI 2030 and SI 2040 only:
The Power shot function can also be used in the
vertical position for steaming hanging clothes.
The Power shot function can also be used in the
vertical position for steaming hanging clothes.
3 Spray function
Press the spray button (4).
4 Dry ironing
Set the steam regulator (3) on position «0»
(= steam off).
(= steam off).
D After ironing
Unplug the iron and turn the steam regulator to
position «0». To prolong the life of the iron,
empty the water tank. Store the cool iron in a dry
place always standing on its heel rest.
position «0». To prolong the life of the iron,
empty the water tank. Store the cool iron in a dry
place always standing on its heel rest.
E Maintenance and cleaning
To prevent damaging the sole plate, do not iron
over metal buttons or zippers. Clean the sole
plate regularly with a damp cloth. To remove
mineral/starch residues, use a vinegar/water
mixture in the ratio of 1 : 2. Never use steel wool,
abrasive scouring pads, powders or other
chemicals to clean the sole plate.
over metal buttons or zippers. Clean the sole
plate regularly with a damp cloth. To remove
mineral/starch residues, use a vinegar/water
mixture in the ratio of 1 : 2. Never use steel wool,
abrasive scouring pads, powders or other
chemicals to clean the sole plate.
F Cleaning the anticalc valve
The anticalc valve located on the lower end of
the steam regulator (3) has to be decalcified
regularly (e.g. whenever steam development is
insufficient). For this, the water tank has to be
empty.
the steam regulator (3) has to be decalcified
regularly (e.g. whenever steam development is
insufficient). For this, the water tank has to be
empty.
Removing the steam regulator with the anticalc
valve:
Turn the steam regulator clockwise towards
valve:
Turn the steam regulator clockwise towards
.
Keep on turning firmly beyond the resistance
until the steam regulator is lifted. When
positioned at «•» (anticalc system), pull it out
vertically. Do not touch the anticalc valve at its
lower end. Immerse the anticalc valve in vinegar
(not vinegar essence) or lemon juice for a
minimum of 30 minutes. Brush off remaining
residues and rinse under running water
(fig. F 1–5).
until the steam regulator is lifted. When
positioned at «•» (anticalc system), pull it out
vertically. Do not touch the anticalc valve at its
lower end. Immerse the anticalc valve in vinegar
(not vinegar essence) or lemon juice for a
minimum of 30 minutes. Brush off remaining
residues and rinse under running water
(fig. F 1–5).
Re-inserting the steam regulator:
When re-inserting the steam regulator, make
sure the steam regulator base still points on
setting «•» (anticalc system) (fig. F 6). When
firmly pushing down the steam regulator, it turns
back to
When re-inserting the steam regulator, make
sure the steam regulator base still points on
setting «•» (anticalc system) (fig. F 6). When
firmly pushing down the steam regulator, it turns
back to
(fig. F 7) where it catches.
Notice: The iron must never be used without
steam regulator.
steam regulator.
G Decalcifying / anticalc system
In order to clean the steam chamber from
residues, decalcify it as shown in picture section
G 1–11.
Caution: Hot water and steam will come out
from the sole plate when the steam regulator is
turned clockwise beyond
residues, decalcify it as shown in picture section
G 1–11.
Caution: Hot water and steam will come out
from the sole plate when the steam regulator is
turned clockwise beyond
.
Wait for the sole plate to cool down, then clean
it as described above.
Then refill the tank with water, heat up the iron
and press the Power shot button four times to
rinse the iron before ironing (fig. G 12–14).
Do not use commercial decalcifiers, they may
damage the iron.
it as described above.
Then refill the tank with water, heat up the iron
and press the Power shot button four times to
rinse the iron before ironing (fig. G 12–14).
Do not use commercial decalcifiers, they may
damage the iron.
Trouble-shooting guide
Subject to change without notice.
This product conforms to the European
Directives EMC 2004/108/EC and Low
Voltage 2006/95/EC.
Directives EMC 2004/108/EC and Low
Voltage 2006/95/EC.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Guarantee
We grant 1 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate, free of charge,
any defects in the appliance resulting from faults in
materials or workmanship, either by repairing or
replacing the complete appliance as we may
choose.
This guarantee extends to every country where this
appliance is supplied by Braun or its appointed
distributor.
We grant 1 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate, free of charge,
any defects in the appliance resulting from faults in
materials or workmanship, either by repairing or
replacing the complete appliance as we may
choose.
This guarantee extends to every country where this
appliance is supplied by Braun or its appointed
distributor.
This guarantee does not cover: damage due to
improper use, normal wear or use as well as defects
that have a negligible effect on the value or opera-
tion of the appliance. The guarantee becomes void
if repairs are undertaken by unauthorised persons
and if original Braun parts are not used.
improper use, normal wear or use as well as defects
that have a negligible effect on the value or opera-
tion of the appliance. The guarantee becomes void
if repairs are undertaken by unauthorised persons
and if original Braun parts are not used.
To obtain service within the guarantee period, hand
in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service
Centre.
in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service
Centre.
For UK only:
This guarantee in no way affects your rights under
statutory law.
This guarantee in no way affects your rights under
statutory law.
Problem
Remedy
Drops coming out of
the steam vents
the steam vents
Turn the steam regulator
anti-clockwise to reduce
the steam or turn it off.
Take longer intervals when
pressing the Power shot
button.
Select a higher tempera-
ture setting.
anti-clockwise to reduce
the steam or turn it off.
Take longer intervals when
pressing the Power shot
button.
Select a higher tempera-
ture setting.
Less steam develops
or no steam at all
or no steam at all
Check water level. Clean
the anticalc valve.
the anticalc valve.
Calcium particles
coming through
the steam vents
coming through
the steam vents
Decalcify the steam
chamber.
chamber.
3670362_SI2000_Korea Seite 4 Mittwoch, 4. Juli 2007 9:06 09