Boxlight XD-5m Manuale Utente
10
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
F
IGURE
7
Connecting the projector to a video player using an S-video cable and the audio cable
and adapter
and adapter
NOTE: The audio adapter is
provided so that the same audio
cable used to connect a computer
can be used with the adapter to
connect a VCR.
4
Plug the audio adapter’s white connector into the left “audio
out” connector on your video player. Plug the adapter’s red
connector into the right “audio out” connector on the video
player (Figure 6 and Figure 7).
out” connector on your video player. Plug the adapter’s red
connector into the right “audio out” connector on the video
player (Figure 6 and Figure 7).
5
Plug the audio adapter’s other end into the audio cable.
6
Plug the audio cable into the “audio in”
connector on the
projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM.
It automatically adjusts to optimize its performance for the
incoming video. See “Video Standard” on page 23 for details.
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM.
It automatically adjusts to optimize its performance for the
incoming video. See “Video Standard” on page 23 for details.
CAUTION: Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
audio cable
S-video cable
audio
adapter
adapter