Boss Audio Systems BR-900CD Manuale Utente
67
Section 2
Editing the Performance on a Track (Track Editing)
The BR-900CD allows you to edit your songs by performing
editing functions such as copying and moving data recorded
on the tracks.
editing functions such as copying and moving data recorded
on the tracks.
Data is saved in its edited form when you return to the Play
screen from the Track Edit screen.
screen from the Track Edit screen.
* During automatic updating, “Keep power on!” appears in the
upper line of the display, while the lower line shows what is
being processed.
being processed.
To copy, move, or erase repeated portions, you first need to
set the portion to be repeated, using the procedure described
on p. 51.
set the portion to be repeated, using the procedure described
on p. 51.
Copying Data (Track Copy)
Track Copy allows you to copy a specific part of data and
then place it in a different location.
then place it in a different location.
You can perform editing operations such as copying the data
on a track all at once, or copying the data from a specified
part as many times as you wish.
on a track all at once, or copying the data from a specified
part as many times as you wish.
If, for example, you want to use a phrase from a certain track,
or have the same phrase repeated again and again, the copy
function will help save you time.
or have the same phrase repeated again and again, the copy
function will help save you time.
* If data exists at the position being copied to, that data will be
overwritten.
* The portion being copied must be longer than 1.0 seconds long.
If the copied portion is 1.0 seconds or less, no sound will be
heard even if the copy is carried out.
heard even if the copy is carried out.
The three types of Track Copy are given below.
Copying the repeated portion (AB)
Perform the procedure given below to copy the portion from
the repeat start (A) to the repeat end (B).
the repeat start (A) to the repeat end (B).
Ex. 1: Copying twice to the same track
fig.02-302
Ex. 2: Copying twice to another track
fig.02-303
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “TRK,”
and press [ENTER].
fig.02-304d
3. Press CURSOR [
] [
] to move the cursor to “CPY,”
and press [ENTER].
fig.02-305d
About the Measure/Time Specification screen
Measures and time are specified in the “S” (Start), “E”
(End), and “T” (To) screens in Track Edit as shown
below.
(End), and “T” (To) screens in Track Edit as shown
below.
fig.02-301d
Beat
Measure
S (Start) / E (End) / T (To)
Frame
Hours
Minutes
Seconds
Sub Frame
(Ex.)
Repeat
Start (A)
Repeat
End (B)
TO
Time
Repeat
Start (A)
Repeat
End (B)
End (B)
TO
Time