Biostar U8598 Manuale Proprietario

 

 

 

 

 

 

                     Mainboard Features 

37

 

1.  From Windows 2000, open the Control Panel from “My Computer” followed by the 

System icon.   

2.  Choose the “Hardware” tab, then click the “Device Manager” tab. 
3.  Click the “+” in front of “SCSI & RAID Controllers hardware type.” The driver 

“Win2000 Promise FastTrak 376 (tm) Controller” should appear. 

 

 

 

The following three sections detail the installation of the FastTrak 376 drivers while 
installing Windows 98/Me (with the FastTrak 376 controller already in place). If you’re 
installing the FastTrak 376 drivers on a system with Windows 98/Me already installed, 
see “Installing Drivers with Existing Windows 98/Me” on page 31. 

 

1. 

After installing the FastTrak 376 controller and configuring the hard drive(s), partition 
and format your hard drive(s), if necessary. 

2. 

Install Windows 98/Me normally. 

3. 

After installation, go the “Start” menu and choose “Settings.” 

4. 

From the “Settings” menu, choose “Control Panel.” 

5. 

In the “Control Panel” window, double-click on the “System” icon. 

6. 

In the “System” window, choose the “Device Manager” tab. 

7.  In the hierarchical display under “Other Devices” is a listing for “PCI RAID 

Controller.” Choose it and then press the “Properties” button. 

8.  Choose the “Driver” tab in the “Properties” window, choose “Update Driver,” and then 

press “Next.” 

9.  Choose “Search for a better driver than the one your device is using now 

(recommended),” then press “Next.” 

10.  Choose “Specify Location,” and then type “A:\WIN98” in the text box. 

11.  Insert the FastTrak 376 Driver diskette into the A: drive. 

12. Press the “Next” button. A message informing you that Windows 98 has found 

“Win98-ME Promise FastTrak 376 (tm) Controller” should appear. 

13. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart your 

computer. Be sure to remove the diskette from drive A:.