Biostar TPower X58 Manuale Proprietario

Before doing this, please download the proper BIOS file from our website: 

www.biostar.com.tw   

Update BIOS procedure should be run with 

Clear CMOS (or Restart) function, so please 
check on Clear CMOS (or Restart) first. 

(Restart Your System)

 

 

 

 

Then click Update BIOS button, a 

dialog will show for asking you backup 
current BIOS.  Click Yes for BIOS 
backup and refer to the Backup BIOS 

procedure; or click No to skip this 
procedure. 

 

 

After the BIOS Backup procedure, the 
open dialog will show for requesting the 
BIOS file which is going to be updated.   
Please choose the proper BIOS file for 

updating, then click on Open. 

 

 

The utility will update BIOS with the 
proper BIOS file. 

After the BIOS Update process, click on 
OK to restart the system. 

 

While the system boots up and the full screen logo shows, press 

 <Delete> 

key to enter BIOS setup. 

In the BIOS setup, choose Load Optimized Defaults and press 

<Enter>Æ<Y>Æ<Enter>. After that use Save and Exit Setup to exit BIOS setup.   
BIOS Update is completed. 

 

All the information and content above about the T-Power 2 utility are subject to be 
changed without notice.    For better performance, the utility is being continuously 
updated.    The information and pictures described above are for your reference only. 
The actual information and settings on board may be slightly different from this 
manual.