Biostar TForce 570 U Manuale Proprietario
Motherboard Manual
22
Header for Memory over-voltage: JDDRII_2.4V (for Ver 5.x/6.x)
When processing Memory ov er-voltage, please place the jumper to pin2-3
Closed. The Def ault setting is Pin 1-2 Closed.
Closed. The Def ault setting is Pin 1-2 Closed.
1
3
Pin 1-2 Close:
Normal status (default).
1
3
1
3
Pin 2-3 Close:
Memory voltage 2.4V.
Note:
3.
3.
When “JDDRII_2.4V” jumper cap is placed on Pin 1-2, memory v oltage
can be manually adjusted in CMOS setup screen.
4.
When “JDDRII_2.4V” jumper cap is placed on Pin 2-3, memory v oltage
will be f ixed at 2.4V automatically, and can’t be adjusted under COMS
will be f ixed at 2.4V automatically, and can’t be adjusted under COMS
setup.
Bef ore setting memory over-v oltage, please ensure that your DDR2 supports up
to 2.4V. (Consult your DDR2 supplier)
to 2.4V. (Consult your DDR2 supplier)
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED_5SB
LED_DIMM
Ver 1.x
LED1 LED2
Ver 5.x/6.x
LED_DIMM:
This LED indicates the voltage of memory is activated normally.
LED_5SB:
This LED indicates the system is ready for Power-on.
This LED indicates the voltage of memory is activated normally.
LED_5SB:
This LED indicates the system is ready for Power-on.