Biostar TA970 Manuale Proprietario

Continuing 

Memory sizing error or Memory module not found 

1 Success 

booting. 

8 

Display memory error (system video adapter)   

 

1.  There is no power in the system. 

Power LED does not shine; the fan 
of the power supply does not work 

2.  Indicator light on keyboard does 

not shine. 

1.  Make sure power cable is securely 

plugged in. 

2. Replace 

cable. 

3.  Contact technical support. 

System is inoperative. Keyboard lights 
are on, power indicator lights are lit, 
and hard drives are running. 

Using even pressure on both ends of the 
DIMM, press down firmly until the module 
snaps into place. 

System does not boot from a hard disk 
drive, but can be booted from optical 
drive. 

1.  Check cable running from disk to 

disk controller board. Make sure 
both ends are securely plugged in; 
check the drive type in the standard 
CMOS setup. 

2.  Backing up the hard drive is 

extremely important. All hard disks 
are capable of breaking down at any 
time. 

System only boots from an optical 
drive. Hard disks can be read, 
applications can be used, but system 
fails to boot from a hard disk. 

1.  Back up data and applications files. 
2.  Reformat the hard drive. Re-install 

applications and data using backup 
disks. 

Screen message shows “Invalid 
Configuration” or “CMOS Failure.” 

Review system’s equipment. Make sure 
correct information is in setup. 

System cannot boot after user installs 
a second hard drive. 

1.  Set master/slave jumpers correctly. 
2.  Run SETUP program and select 

correct drive types. Call the drive 
manufacturers for compatibility with 
other drives.