Biostar P4VTC Manuale Proprietario
11
Clear CMOS Jumper: JCMOS1
※ Clear CM OS Procedures:
1. Remov e AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for fiv e seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on AC.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for fiv e seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on AC.
6. Reset y our desired password or clear the CMOS data.
CD-ROM Audio-In Header: JCDIN1/ (JCDIN2=>for versions
below 1.2)
below 1.2)
Pin
Assignment
1
Left Channel Input
2
Ground
3
Ground
1
4
JCDIN1/ 2
4
Right Channel Input
JCMOS1 Assignment
1
3
Pin 1-2 Close
Normal Operation (default)
1
3
Pin 2-3 Close
Clear CMOS Data
The following procedures are for resetting the
BI OS passw or d. I t is important to f ollow these
instructions closely.
BI OS passw or d. I t is important to f ollow these
instructions closely.