Biostar P4VMA-M Manuale Proprietario
P4VMA-M
9
CHAPTER 3: HEADERS & JUM PERS SETUP
3.1 H
OW TO
S
ETUP
J
UMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin
opened
Pin
closed
Pin1-2
closed
3.2 D
ETAIL
S
ETTINGS
JAUDIO1: Front Panel Audio Header
This header allows user to connect the front audio out put cable with the
PC front panel. It will disable the output on back panel audio connectors.
PC front panel. It will disable the output on back panel audio connectors.
1
2
13
14
JAUDIO1
Pin Assignment
Pin Assignment
1 Mic
in/center
2 Ground
3 Mic
power/Bass
4 Audio
power
5
Right line out/Speaker out
Right
Right
6 Right line out/Speaker out Right
7 Reserv ed
8 Key
9 Left line out/Speaker out Left
10 Left line out/Speaker out Left
11
Right line in/Rear speaker
Right
Right
12 Right line in/Rear speaker Right
13 Left line in/Rear speaker Left
14 Left line in/Rear speaker Left
JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the veriaty
devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card
etc..
devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card
etc..
Pin Assignment
1 Left
channel
input
2 Ground
3 Ground
1
JCDIN1
4 Right
channel
input