Biostar P4TDP Manuale Proprietario
P4TDP BIOS Setup
28
9 Frequency Control
Figure 9. Frequency Control
CPU Clock Ratio
This item allows you to select the CPU Ratio.
CPU Voltage
This item allows you to select CPU Voltage Regulator.
The Choices: Default (default), +1.7%, +3.45%, +5.1%.
CPU Clock
This
item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
※
It’s strongly recommended to set CPU Vcore and clock in
default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.
setting, it may cause CPU or M/B damage.