Biostar P4TDK BIOS Manuale Proprietario
P4TDK BIOS Setup
30
CPU Clock
This
item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
※
It’s strongly recommended to set CPU Vcore and clock in
default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.
setting, it may cause CPU or M/B damage.
CPU Voltage Regulator
This item allows you to select CPU Voltage Regulator.
The Choices: Default (default), -0.025V, -0.050V, -0.075V, -0.100V, +0.025V,
+0.050V, +0.075V.
DIMM Voltage Regulator
This item allows you to select DIMM Voltage Regulator.
The Choices: Default(2.5V) (default), 2.8V, 2.7V, 2.6V.
VDDQ Voltage Regulator
This item allows you to select VDDQ Voltage Regulator
The Choices: Default(1.5V) (default), 1.6V, 1.7V, 1.8V.
DDRVTT Voltage Regulator
This item allows you to select VDDQ Voltage Regulator
The Choices: Default(1.25V) (default), 1.30V, 1.35V, 1.40V.