Biostar M7NCD Manuale Proprietario
6
CPU Fan Header: JCFAN1
Pin No.
Assignmen t
1
Ground
2
+12V
1
3
JCFAN1
3
FAN rpm Rate Sense
S ystem Fan Header: JSFAN1 (optional)
Pin No.
Assignmen t
1
Ground
2
+12V
1
JSFAN1
3
FAN rpm Rate Sense
DDR DIMM Modules: DIMMB1, DIMMB2
DRAM Access Time: 2.5V Unbuffered DDR 266/333/400 MHz Type required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
Total Memory Size with Un bu ffere d DIMMs
DIMM Socket
Location
DDR Module
Total Memory
Size (MB)
DIMMB1 64MB/128MB/256MB/512MB/1GB
*1
DIMMB2 64MB/128MB/256MB/512MB/1GB
*1
Max is
2GB
***Only for reference***
Installing DDR Module
1. Unlock a DIMM slot by pressing the retaining
clips outward. Align a DIMM on the slot such
that the notch on the DIMM matches the
break on the slot.
that the notch on the DIMM matches the
break on the slot.
2.
Insert the DIMM f irmly and vertically into the
slot until the retaining chip snap back in
place and the Dimm is properly seated.
slot until the retaining chip snap back in
place and the Dimm is properly seated.