Biostar K8VGA-M Manuale Proprietario
K8VGA-M BIOS Setup
User’s Manual
7
1.6 P
N
P/PCI
C
ONFIGURATIONS
This submenu allows you to configure certain “Plug and Play” and PCI
options.
options.
1.7 PC
H
EALTH
S
TATUS
This submenu allows you to monitor the hardware of your system.
1.8 F
REQUENCY
C
ONTROL
This submenu allows you to change CPU Vcore Voltage and CPU/PCI
clock.
(However, this function is strongly recommended not to use. Not
properly change the voltage and clock may cause CPU or M/B
damage!)
clock.
(However, this function is strongly recommended not to use. Not
properly change the voltage and clock may cause CPU or M/B
damage!)
1.9 L
OAD
O
PTIMIZED
D
EFAULTS
This selection allows you to reload the BIOS when the system is having
problems particularly with the boot sequence. These configurations are
factory settings optimized for this system. A confirmation message will be
displayed before defaults are set.
problems particularly with the boot sequence. These configurations are
factory settings optimized for this system. A confirmation message will be
displayed before defaults are set.
1.10 S
ET
S
UPERVISOR
P
ASSWORD
Setting the supervisor password will prohibit everyone except the
supervisor from making changes using the CMOS Setup Utility. You will
be prompted with to enter a password.
supervisor from making changes using the CMOS Setup Utility. You will
be prompted with to enter a password.
1.11 S
ET
U
SER
P
ASSWORD
If the Supervisor Password is not set, then the User Password will function
in the same way as the Supervisor Password. If the Supervisor
Password is set and the User Password is set, the “User” will only be able
to view configurations but will not be able to change them.
in the same way as the Supervisor Password. If the Supervisor
Password is set and the User Password is set, the “User” will only be able
to view configurations but will not be able to change them.