Biostar K8NHA Pro Manuale Proprietario
29
The Choices: Default (default), 1.85V, 1.75V, 1.65V.
DDR Voltage
This item allows you to select DDR Voltage Control.
The Choices: Default (Default), 2.95V, 2.85V, 2.75V.
The Choices: Default (Default), 2.95V, 2.85V, 2.75V.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
not functioning, there are two methods of booting-up the system.
Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as
“ON” status. All the CMOS data will be loaded as defaults setting.
“ON” status. All the CMOS data will be loaded as defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed. This
action will boot-up the system according to FSB of the processor.
keep-on pressing the <Insert> key until the power-on screen showed. This
action will boot-up the system according to FSB of the processor.