Biostar K8NHA Grand Manuale Proprietario
K
K
8
8
N
N
H
H
A
A
G
G
r
r
a
a
n
n
d
d
9
2.2 F
AN
H
EADERS
C PU FAN He ade r: JC FAN1
Pin Assignment
1 Ground
2 +12V
2 +12V
1
JCFAN1
3
FAN RPM rate sense
System Fan Heade r: JSFAN1
Pin Assignment
1 Ground
2 +12V
2 +12V
1
JSFAN1
3
FAN RPM rate sense
Note:
The JCFAN1 and JSFAN1support system cooling f an with Smart Fan Control
utility. It supports 3 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positiv e and should be
connected to pin#2, and the black wire is Ground and should be connected to
GND.
utility. It supports 3 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positiv e and should be
connected to pin#2, and the black wire is Ground and should be connected to
GND.
2.3 M
EMORY
M
ODULES
I
NSTALLATION
2.2.1
DDR M odule installation
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the break
on the Slot.
on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.