Biostar I915P-A7 Combo Manuale Proprietario

 

  Remove Pin Cap before installation, and make good preservation for future 

use. When the CPU is removed, cover the Pin Cap on the empty socket to 
ensure pin legs won’t be damaged. 

  Warranty will be void if the pin protection cap is not in place to protect the 

socket pin when sending this board for service. 

pin cap 

Step 1:   

Pull the lever sideways away from the socket and then raise the lever up to a 
90-degree angle.   

 

Step 2:   

Look for the black cut edge on socket, and the white dot on CPU should point 
wards this black cut edge. The CPU will fit only in the correct orientation.