Biostar I86PE-A7 Manuale Proprietario
I86PE-A7 BIOS Setup
30
9.6 CPU
C
LOCK
This
item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON”
status. All the CMOS data will be loaded as defaults setting.
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default
setting. If the CPU Vcore and clock are not in default setting, it may
cause CPU or M/B damage.
setting. If the CPU Vcore and clock are not in default setting, it may
cause CPU or M/B damage.