Benq Projector SH940 Manuale Proprietario

  27

  Using the projector

En

glish

The projector is preset with several pre-defined picture modes so that you can choose one to suit your 
operating environment and input source picture type.

Press PRESET MODE on the projector or MODE/ENTER on the 
remote control repeatedly until your desired mode is selected.

1. Press MENU on the projector or MENU/EXIT on the remote 

control and then press  /  until the Picture -- Basic menu is 
highlighted.

2. Press   to highlight Picture Mode.
3. Press  /  until your desired mode is selected.

These modes consist of preset values suitable for various projection situations as described below:

•  Cinema: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through 

the PC input for best viewing in a blackened (little light) environment.

•  Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments 

where extra-high brightness is required, such as using the projector in well lit rooms.

•  Presentation: Is designed for presentations. The brightness is emphasized in this mode to match PC 

and notebook coloring.

•  sRGB: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness 

setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated 
camera, and for viewing PC graphic and drawing applications such as AutoCAD.

•  User 1/User 2: Recalls the customized settings. See 

for details.

The pre-defined picture mode settings can be altered via the available items shown in the Picture -- 
Basic and Picture -- Advanced menus.

To fine-tune the picture mode:
1. Press MENU on the projector or MENU/EXIT on the remote control, and then press  /  until 

the Picture -- Basic or Picture -- Advanced menu is highlighted.

2. Press   to highlight the item you want to adjust and press  /  to set your desired value. Your 

selection is automatically stored in the projector and associated with that input source.
See 

 and 

 

for details.

Each time you change the picture mode, the projector also changes the setting to the one which was last 
set for that particular picture mode on that particular input. If you change the input source, the most 
recently used picture mode and settings for that input and resolution will be restored.

SH940_EN.book  Page 27  Wednesday, October 3, 2012  2:36 PM