Benq PB9200 Manuale Utente

Troubleshooting

40

Troubleshooting

Related Messages

When the unit's power is on, messages such as those shown below may be displayed. When 
any such message is displayed on the screen, please respond as described below. If the same 
message is displayed after the treatment, or if a message other than the following appears, 
please contact your dealer or service company.

 Although these messages will be automatically disappeared around several minutes, 

it will be reappeared every time the power is turned on.

(This table is continued to the following page.)

•

A lamp has a finite product life. Lamps are characterized by the fact that, after long 
hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This 
projector is equipped with an automatic shut-down function, such that the power will 
automatically be turned off when lamp usage time has reached 2000 hours. Please be 
aware, however, that among lamp types, there are major differences in product 
lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic 
shut-down function of this projector.

The time the lamp timer has counted is 
approaching 2000 hours.
Preparation of a new lamp, and an early lamp 
change is recommended. After you have change 
the lamp, please be sure to reset the lamp timer.

The time the lamp timer has counted is 
approaching 2000 hours, so a lamp change 
within 

** 

hours is recommended.

When lamp usage reaches 2000 hours, the power 
will automatically be turned off.

Please change the lamp by referring to the section 
“Lamp”. After you have changed the lamp, please 
be sure to reset the lamp timer.

As the time the lamp timer has counted has 
reached 2000 hours, the power will soon be 
automatically turned off.
Please immediately turn the power off, and 
change the lamp by referring to the section 
“Lamp”. After changing the lamp, please be sure 
to reset the lamp timer.

PB9200-e.book  Page 40  Thursday, May 27, 2004  2:15 PM