Benq DV3750 Manuale Utente
Setting up Your Display
8
Eng
lish
lish
Connecting S-Video Signals
Connecting Component Video Signals
1. Connect the S-Video output of your AV
equipment to the display's S-VIDEO terminal
using an S-Video cable. Pay attention to the
direction of the connector on the S-Video
cable when inserting.
2. Connect the audio output of your AV
equipment to the display's S-VIDEO AUDIO
L/R input terminals using the AV cable or
equivalent.
An S-video signal provides a higher quality
image to that of Composite video. It is
recommended to use this input whenever
possible. If your AV equipment provides a
component video output (YP
B
P
R
or YC
B
C
R
),
this should be used in preference to either
composite or S-video signals.
1. Connect the Component video output of your
AV equipment to the display's COMPONENT
Y C
B
/P
B
C
R
/P
R
terminals using a Component
video cable.
2. Connect the audio output of your AV
equipment to the display's COMPONENT
AUDIO L/R input terminals using the AV
cable or equivalent.
1. Of the currently available video signal
types, Component video input offers the
best quality. Component video output is
available on progressive scan DVD
players and Digital television decoders.
The image quality with this type of input
is superior to that obtained with S-video.
All High Definition Television signals
must go through this input.
2. DV3750 supports 480P, 720P, 576P and
1080i HDTV signals provided by high
definition AV equipment such as a HDTV
decoder.
3. Ensure the connector colors match,
failure to connect the colors of the cables
to the corresponding colored terminals
will result in a incorrectly colour image or
badly distorted image.
DVD player
Audio (AV) cable
S-Video cable
DVD player
Component Video
Cable
Audio (AV) cable