Benq CRT Television MX819ST Manuale Proprietario

Operation

34

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker(s). Be 

sure you have made a correct connection to the projector audio input. See 

 for how the audio input is connected.

To temporarily turn off the sound:
1.

Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced 
menu is highlighted.

2.

Press  

to 

highlight 

Audio Settings and press MODE/ENTER. The Audio 

Settings page displays.

3.

Highlight Mute and press  /  to select On.

If available, you can also press MUTE on the remote control to toggle projector audio between on and off.

To adjust the sound level, press 

, or:

1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Volume and press  /  to select a desired sound level.

To turn off the ring tone:
1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Power On/Off Ring Tone and press  /  to select Off.

The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or 

changing the sound level will not affect the Power On/Off Ring Tone.

Using the test pattern

The projector is able to display the grid test 

pattern. It helps you adjust the image size and 

focus and check that the projected image is free 

from distortion.

To display the test pattern, open the OSD menu 

and go to the SYSTEM SETUP: Advanced > 
Test Pattern and press  /  to select On.