BENDIX SD-08-2412 Manuale Utente

Pagina di 28
27
Compressor with up to 25% duty cycle
Footnotes:  
1  With increased air demand the air dryer cartridge needs to be replaced more often.
2  Use the drain valves to slowly drain all reservoirs to zero psi.
3  Allow the oil/water mixture to fully settle before measuring oil quantity.
4  To counter above normal temperatures at the air dryer inlet, (and resultant oil-vapor passing 
upstream in the air system) replace the discharge line with one of a larger diameter and/
or longer length.  This helps reduce the air's temperature.  If suffi cient cooling occurs, 
the oil-vapor condenses and can be removed by the air dryer.  Discharge line upgrades 
are not covered under warranty.  Note: To help prevent discharge line freeze-ups, shorter 
discharge line lengths or insulation may be required in cold climates.  (See Bendix Bulletins 
TCH-008-021 and TCH-008-022, included in Appendix B, for more information.)
5  For certain vehicles/applications, where turbo-charged inlet air is used, a smaller size 
compressor may be permissible.
  
 
 
 
Recom- 
Recom- 
Acceptable
  
 
Typical 
Discharge 
mended 
mended 
Reservoir
 
 
 
Compressors 
Line 
Air Dryer 
Reservoir 
Oil Contents
3
 
 
No. of 
Spec'd 
        
Cartridge 
Drain 
at Regular 
 
 
Axles 
 
       
Replacement
1
 Schedule
2
 Drain 
Interval
High Air Use 
Low Air Use
 
e.g. Double/triple trailer, 
open highway coach, (most) 
pick-up & delivery, yard or 
terminal jockey, off-highway, 
construction, loggers, concrete 
mixer, dump truck, fi re truck.
e.g. Line haul single trailer 
w/o air suspension, air over 
hydraulic brakes.
e.g. Line haul single trailer 
with air suspension,
 RV,
school bus.
e.g. City transit bus, refuse, 
bulk unloaders, low boys, 
urban region coach, central tire 
infl ation.
5
or
less
5
or
less
8
or
less
12
or
less
Table A:  Maintenance Schedule and Usage Guidelines
Recom-
mended
Every
Month - 
Max of 
every 90 
days
Every
Month
Every 3
Years
Every 2
Years
Every
Year
I.D.
Vehicle Used for:
Column 1
Column 2
Column 3
Column 4
Column 5
Regularly scheduled maintenance is the single most important factor in maintaining the air brake charging system.
Note: Compressor and/or air dryer 
upgrades are recommended in 
cases where duty cycle is greater 
than the normal range (for the 
examples above). 
 
For Bendix
®
 Tu-Flo
®
 550 and 750 
compressors, unloader service is 
recommended every 250,000 miles.
Length        
6 ft.
1/2 in.
9 ft.
1/2 in.
12 ft.
1/2 in.
5/8 in.
12 ft.
BASIC
 test
acceptable 
range:
5 oil units
per month.
See 
appendix
A.
For oil carry-over 
control
suggested 
upgrades:
3/4 in.      15 ft.
For oil carry-over 
control
suggested 
upgrades:
5/8 in.      15 ft.
For oil carry-over 
control
suggested 
upgrades:
5/8 in.      9 ft.
For oil carry-over 
control
suggested 
upgrades:
5/8 in.      12 ft.
Compressor with less than 15% duty cycle
Compressor with up to 25% duty cycle
Compressor with up to 25% duty cycle
Bendix
®
 BA-921
®
 air compressor 
Bendix
®
 T
u-Flo
®
 550 air compressor 
Bendix
®
 T
u-Flo
®
 750 air compressor 
Bendix
®
 BA-922
®
or DuraFlo 596
™ 
air compressor
Bendix
®
 
BASIC
 test
acceptable 
range:
3 oil units
per month.
See 
appendix
A.
For the
BASIC 
Test Kit:
Order
Bendix
P/N 
5013711