Brother LX-910D Manuale Utente

- 8 -

POWER SWITCH On/Off  

Turns the machine on/off.

  

  

(cut button) 

Cuts the document in the current position.

Use to feed the document manually.

Use this button to start or stop an operation.
The green LED indicates that the machine has power, and is
turned on.

Auto Cut Mode selector switch
- Border

The machine will cut the film with about a 0.18” (4.5mm) margin
from each edge of the document.
- Leaves an extra margin of laminate.

- No Border

The machine will cut the film with a margin that is approximately
0.06” (1.5mm) from each edge of the document.
- Trims the laminate close to the document.

-Off

Turns the cutting mode off.

Power switch

Cut button

Feed button

Start/Stop button

Auto Cut Mode
Selector switch

Cutting line

Film slit

Shutter button

Shutter

Plastic side holder

Projection

Cuts the excess film on this line to install the cartridge properly.

Lifts the shutter upward to open the film cartridge cover.

Locks the film cartridge cover and returns the shutter to original
position.

The top edge of film appears from this film slit.