Behringer MINIAMP AMP800 Manuale Utente

MINIAMP AMP800 User Manual

(1)

(2) (3)

(4)

(5)

(6)

(7)

(8)

Fig. 2.1: AMP800 front panel

In the previous illustration, each control element is associated with a 

callout, for example  

(1)

. In this section, use these callouts to identify 

details about each control element. For each Input Channel (A and B), 

the front panel includes control elements  

(1)

  and  

(2)

. To manage the 

signal in each of these Input Channels, use these control elements:

(1) 

LEVEL control: To adjust the input level of a signal, 

turn this control toward 0 (minimum level) or, 

alternatively 6 (maximum level).

(2) 

BALANCE control: To adjust the stereo image of a signal, 

turn this control toward L (left) or, alternatively R (right).

(3) 

A + B meter: To monitor the combined level of both signals 

(A and B), use this meter. An LED glows next to the value that 

identifies the combined level (-24 dB to 0 dB). If the signal is too 

strong, the CLIP LED glows. Most of the time, the optimal level 

is 0 dB (a full signal).

For each Headphone Channel (1, 2, 3, and 4), the front panel includes 

control elements  

(4)

  through  

(7)

. To manage each Headphone 

Channel, use these control elements:

(4) 

 (headphone) connector: To connect a headphone, 

use this stereo, ¼" TRS connector. For details about TRS plugs, 

see 4. Audio Connections.

(5) 

INPUT button: To select an Input Channel, push this button. 

When you listen to:

Input Channel A, this button is not pushed in and not lit

Input Channel B, this button is pushed in and lit

(6) 

PHONES LEVEL control: To adjust the level of a headphone 

signal, turn this control toward 0 (minimum volume) or, 

alternatively 6 (maximum volume).

(7) 

CH meter: To monitor the level of a headphone signal, use this 

meter. An LED glows next to the value that identifies the 

headphone volume (-24 dB to 0 dB). If the signal is too strong, 

the CLIP LED glows. Most of the time, the optimal volume is 

0 dB (a full signal).

(8) 

 (power) button: To turn the AMP800 on and off, push this 

button. When you turn the AMP800:

on, this button is pushed in and lit

off, this button is not pushed in and not lit

The AMP800 is a headphone amplifier that includes 4 Headphone 

Channels, so you can share the
AMP800 with other musicians. In addition, each musician can choose 

between 2 audio channels: Input Channel A and Input Channel B.

This section describes how to use the front panel of the AMP800, 

illustrated as follows: