Brother Z-8550A Manuale Proprietario

 

 

Z-8550A, 8560A

 

10. APPLYING GREASE (When “GrEASEUP” appears)

85 

If “GrEASEUP” flashes on the main display (1) and a buzzer sounds when the power switch is turned on, it means that grease 
needs to be applied. (The sewing machine will not operate at this time, even if the treadle is depressed.) 
Apply grease while referring to the following page. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1.  Press the RESET key (2). 
2.  The main display (1) will change to zigzag width/zigzag base line position display mode, and sewing will be possible when 

the treadle is depressed. 
(The power indicator (3) will flash.) 

•  The "GrEASEUP" notification will continue to appear and the power indicator (3) will flash each time the power switch is 

turned on until you apply grease and reset the cumulative operating time (refer to pages 86 - 87). 

•  If you continue to use the sewing machine after the “GrEASEUP” notification appears without applying grease (or 

without carrying out the reset procedure), “Err100” will appear after a certain period of time and the sewing machine will 
be forcibly prevented from operating for safety reasons. 
If this happens, apply grease and carry out the reset procedure. 

3481M