Boxlight 12SF Manuale Utente
35
1
Use the up and down arrows to highlight Contrast, press
menu/select
, use the arrows to adjust the contrast, then press
menu/select
to accept your changes.
Tint
NOTE: The color setting applies
to video sources only. The tint set-
ting applies to NTSC video sources
only.
The tint adjusts the red-green color balance in the projected
image.
image.
1
Use the up and down arrows to highlight Tint, press
menu/select
, use the arrows to adjust the tint, then press
menu/select
to accept your changes.
Color
The color setting adjusts a video image from black and white to
fully saturated color.
fully saturated color.
1
Use the up and down arrows to highlight Color, press
menu/select
, use the arrows to adjust the color, then press
menu/select
to accept your changes.
Sharpness
This setting adjusts sharpness of a video image.
1
Use the up and down arrows to highlight Sharpness, press
menu/select
, use the arrows to cycle through the options soft,
med-soft, medium, med-hard, and hard, then press
menu/
select
to accept your selection.
Screen Aspect
This setting adjusts display format of a video image.
1
Use the up and down arrows to highlight Screen Aspect, press
menu/select
, use the arrows to choose between 4:3 and 16:9,
then press
menu/select
to accept your selection.
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
active source and when the projector is in standby.
1
Use the up and down arrows to highlight Blank screen, press
menu/select
, use the arrows to cycle through the options blue,
black, and white, then press
menu/select
to accept your selec-
tion.