Bontrager TRIP 4W Manuale Utente
If the computer is giving erratic information, the battery may be running low.
Replace the battery whenever the computer malfunctions, or every 6 months.
When purchasing a new battery, it is best to take the old battery to the store with
you. This is the battery type: CR2032, lithium cell, 3 volts.
Replace the battery whenever the computer malfunctions, or every 6 months.
When purchasing a new battery, it is best to take the old battery to the store with
you. This is the battery type: CR2032, lithium cell, 3 volts.
When the battery is removed, the computer automatically resets function totals
to zero. After installing a new battery, you can manually set your totals, but you
must note those values before removing the battery.
to zero. After installing a new battery, you can manually set your totals, but you
must note those values before removing the battery.
To Replace the Battery
Battery Maintenance
Reset
A Reset erases all data and settings. Before a Reset, you may wish to record the
total miles (or kilometers) of the odometer so you can set the odometer to this
number later during set up.
total miles (or kilometers) of the odometer so you can set the odometer to this
number later during set up.
Figure 11. Reset Button
Figure 9. Removing the Battery Cover
Hold the Reset button (AC) for two seconds (Figure 11). A ball point pen
works well for this. The button is on the back of the computer.
works well for this. The button is on the back of the computer.
To Perform a Reset
Remove the computer from its base. Rotate the battery cover about one-
quarter turn in a counter-clockwise direction (Figure 9). A coin or flat head
screwdriver works well for this.
quarter turn in a counter-clockwise direction (Figure 9). A coin or flat head
screwdriver works well for this.
Lift the battery cover, exposing the battery. Be careful to avoid losing the
rubber O-ring seal.
rubber O-ring seal.
Remove the old battery.
Insert the new battery with the ‘cross’ and identifying label pointing up
(Figure 10).
(Figure 10).
Replace the battery cover with O-ring seal and rotate clockwise one-
quarter turn.
quarter turn.
1.
2.
3.
4.
5.
Figure 10. Insert the New Battery