Benq PL460 Manuale Proprietario

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or

on a horizontal surface with the optional desktop stands. Please pay attention to the

following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this

display by only one person may result in danger and injuries.

• Refer the installation to qualified technicians. Improper installation may cause the

display to fall or malfunction.

Installing the display on a wall

1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.

Make sure that the size of the cloth is larger than the display.

2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw

holes on the back of the display

as shown in the illustration.

5. Install the wall mounting bracket

on the display and attach the

display to the wall according to

the mounting bracket’s

instructions. The length of the

screw should exceed the

thickness of the wall mounting

bracket by at least 10 mm. Make

sure that all screws are

tightened and secured properly.

(Recommended torque: 470 -

635N•cm). The mounting means

should be strong enough to bear

the weight of the display.

400mm

(15.75”)

400mm

(15.75”)

*Screw type: M6

Thickness of the
wall mounting
bracket

10 mm
(0.39")

LCD display