Benq PL460 Manuale Proprietario

The OSD (On-Screen Display) menu

36

• RS-232C/LAN: Sets a terminal to control the display.
• IR Passthrough: Select it when multiple displays are connected via RS-232C 

cables. 

-  Primary: Designate the display as the primary unit for remote control 

operation. Only this display will be operated by the remote control.

-  Secondary: Designate the display as the secondary unit. The display can 

not be operated by the remote control, and will only receive the control 

signal from the primary display via the RS-232 connection.

See 

 for details.

Assigns an ID number for the current display when multiple displays are 

connected.

For use when under the RS-232C control mode.

Uses the HDMI CEC (Consumer Electronics Control) industry standard 

protocol to share functionality between connected devices and the display. To 

transfer system commands, you need to use an HDMI cable to connect the 

display to a device equipped with HDMI CEC. Select On in this menu and you 

can operate the main functionalities on your display and the connected device 

with one remote control.