Bags and Gloves E-9220T Manuale Utente
57
www.gateway.com
Replacing a fan
7
Insert the new fan into the opening left by the old fan, then engage the fan retention
tabs and fan release tab with the chassis until it snaps into place.
tabs and fan release tab with the chassis until it snaps into place.
8
Plug the fan cable into the fan connector on the system board.
9
10
Follow the instructions in
.
To replace a back fan:
1
Follow the instructions in
.
2
Follow the instructions in
3
Unplug the fan cable from the fan connector on the system board.
Fan cable
Fan retention
screw
screw
Fan retention
screw
screw