West Elm Faceted Glass Pendant Istruzioni Di Montaggio

assembly instructions

page 2 of 2

09/08 - 7149354

5. Connect the neutral fixture wire to the neutral junction box wire ( white). Fasten each together with a plastic wire 

connector (H) and wrap the connection with electrical tape. Be sure no wire strands are exposed. 

6. Connect the hot fixture wire to the hot junction box wire (black). Fasten each together with a plastic wire 

connector (H) and wrap the connection with electrical tape. Be sure no wire strands are exposed. DO NOT 

REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.

7. Gently tuck the wire connections neatly into the ceiling junction box.

8. Attach the mounting plate (E) to the ceiling outlet box using the enclosed mounting screws (F). Tighten screws 

with a screwdriver.

9. Pull canopy (D) up over the mounting plate (E), align the hole in the mounting plate with the hole in the canopy. 

10. Raise the cord grip (C) and tighten it by hand until it holds the canopy in place.

1. Insert (1) 60-watt Type A bulb (not included) into the socket . DO NOT EXCEED SPECIFIED WATTAGE.

2. Restore power to junction box and test fixture.

3. Assembly is complete.    

 

• Wipe clean using a soft, dry cloth or static duster.

• Always avoid the use of harsh chemicals and abrasives to clean fixture as they may damage the finish.

Faceted Glass Pendant