HP C7973W Dépliant

Pagina di 2
HP LTO Ultrium Media
HP Ultrium tape technology has been designed to deliver 
exceptional reliability and performance at the lowest cost 
per GB.
 The Ultrium format builds on the best of existing 
technologies; open standards increase innovation and  
widen customer choice in terms of performance, capacity, 
and form factor. Backed by HP’s exhaustive media qualification 
process, HP Ultrium data 
cartridges support all  
HP StorageWorks and  
non-HP Ultrium tape devices. 
Key Features and Benefits
 Up to 3 TB compressed capacity.
 Supports transfer speeds of 140 MB/s (native), 
280 MB/sec (2:1) with Generation 5.
 For use in all HP and non-HP LTO Ultrium products.
 Unique coloured cartridge to assist with 
identification in mixed media environments.
 Improved cartridge design to prevent the leader  
pin from being pulled from inside the tape housing 
(a key weakness of some other technologies).
 Very low media cost per GB.
 LTO cartridge memory in media to improve access 
time and provide enhanced media monitoring.
 Durable cartridge designed to minimise wear  
and debris (important in automation).
 Tested to extremes in HP’s media laboratory, to  
a level of specification unique to Hewlett-Packard. 
Many of the test procedures required for HP Brand 
qualification (e.g. load/unload, shoeshine, drop 
testing and environmental stress testing) are not 
required for the LTO Ultrium logo.
 HP LTO-4 and LTO-5 offer data encryption for 
enhanced data security.
 HP offers both labelled (Custom Labelled  
and Non-Custom Labelled) and non-labelled  
data cartridges.
 Custom labelled offerings allow automation 
customers the ability to customise their label  
to their specific needs. This includes the ability to 
define the barcode label type and to specify  
an exact label sequence. Custom labels are  
pre-attached to the media before shipment. 
Available in Europe and the USA. Europe requires  
a Minimum Order Quantity of 5 units or 100 total 
data cartridges (5 units X 20 cartridges).
 HP Non-Custom Labelled media allows automation 
customers the ability to receive labelled media 
without having to wait for a custom labelled solution. 
Barcode sequences are pre-determined by HP and 
are guaranteed to be unique. LTO-1 and LTO-2 
products utilise the double barcode format whereas 
LTO-3 and above utilise the single barcode format. 
HP Non-Custom media is available worldwide.