VeriFone NURIT 8000 Manuale Utente

NURIT 8000 I

NSTALLATION

 G

UIDE

The NURIT 8000 terminal comes with a Lithium-polymer battery. Read this 
section to know how to install and remove the battery.

Depending on your model of the NURIT 8000 terminal, the battery compartment 
may be shared with the SIM, SAM, and SD cards. To gain access to the battery/
card compartment, you must first remove the battery/card compartment door. For 
information on removing and replacing the battery/card compartment cover, see 

The NURIT 8000 allows you to operate the terminal without an external power 
supply, by using a battery.

Remove the battery/card compartment cover. See 

Hold the battery, verifying that the side with the metal contacts are facing 

downwards and that the rounded edge is facing towards the back of the 
compartment.

While holding the battery at a 30° angle, slide the two tabs on the front of the 

battery into the slots on the front wall of the compartment.

Push the back of the battery down, until it snaps into place.

Replace the battery/card compartment cover. See 

Power off the terminal. See 

.

Remove the battery/card compartment cover. See 

Insert your fingernail into the groove at the back of the battery and lift the 

battery, snapping the battery out of place.

Only use batteries provided by VeriFone. For information about purchasing 

additional or replacement batteries, see