Texas Instruments 3138 155 232931 Manuale Utente

 

                                           

CC2420

 

                                                    

SWRS041B                                                         Page 1 of 89

 

•  2.4 GHz IEEE 802.15.4 systems 

•  ZigBee systems 

•  Home/building automation 

•  Industrial Control 

•  Wireless sensor networks 

•  PC peripherals 

•  Consumer Electronics

The

 CC2420

 is a true single-chip 2.4 GHz 

IEEE 802.15.4 compliant RF transceiver 
designed for low power and low voltage 
wireless applications. 

CC2420

 includes a 

digital direct sequence spread spectrum 
baseband modem providing a spreading 
gain of 9 dB and an effective data rate of 
250 kbps. 

The 

CC2420

 is a low-cost, highly integrated 

solution for robust wireless communication 
in the 2.4 GHz unlicensed ISM band. It 
complies with worldwide regulations 
covered by ETSI EN 300 328 and EN 300 
440 class 2 (Europe), FCC CFR47 Part 15 
(US) and ARIB STD-T66 (Japan).   

The 

CC2420

 provides extensive hardware 

support for packet handling, data 
buffering, burst transmissions, data 
encryption, data authentication, clear 
channel assessment, link quality indication 
and packet timing information. These 

features reduce the load on the host 
controller and allow 

CC2420

 to interface 

low-cost microcontrollers. 

The configuration interface and transmit / 
receive FIFOs of 

CC2420

 are accessed via 

an SPI interface. In a typical application 

CC2420

 will be used together with a 

microcontroller and a few external passive 
components. 

CC2420

 is based on Chipcon’s SmartRF

®

-

03 technology in 0.18 

µm CMOS. 

 

•  True single-chip 2.4 GHz IEEE 

802.15.4 compliant RF transceiver 
with baseband modem and MAC 
support 

•  DSSS baseband modem with 2 

MChips/s and 250 kbps effective data 
rate. 

•  Suitable for both RFD and FFD 

operation 

•  Low current consumption (RX: 18.8 

mA, TX: 17.4 mA) 

•  Low supply voltage (2.1 – 3.6 V) with 

integrated voltage regulator 

•  Low supply voltage (1.6 – 2.0 V) with 

external voltage regulator  

•  Programmable output power 
•  No external RF switch / filter needed 
•  I/Q low-IF receiver 
•  I/Q direct upconversion transmitter 
•  Very few external components 
•  128(RX) + 128(TX) byte data buffering 
•  Digital RSSI / LQI support 
•  Hardware MAC encryption (AES-128) 
• Battery 

monitor 

•  QLP-48 package, 7x7 mm 
•  Complies with ETSI EN 300 328, EN 

300 440 class 2, FCC CFR-47 part 15 
and ARIB STD-T66 

•  Powerful and flexible development 

tools available