Technika BRSS10 Manuale Utente

26

Scroll down and select ‘Apply’ to save the new settings 

•

leave this menu.

To enable Dynamic (DHCP) IP setting:
If you want to change to Dynamic (DHCP) IP setting (the 

factory setting) -

Select the Network category of the Settings Menu.

•
The Network status screen appears.

Select the ‘Wired’ option on this screen.

•

Do not attempt to change any of these settings 

unless you have experience with Home Network 

configuration. If you are in any doubt, consult an 

IT professional.

Before  attempting  to  enter  manual  network  settings,. 

you will need to know the following -

A free IP address on your network.

•

A valid Subnet Mask number for your network.

•

The IP address of your network gateway.

•

Primary  and  secondary  DNS  settings  for  your 

•

network.

If you have the above data -

Select the ‘Network’ category of the Settings Menu.

•
The Network status screen appears.

Press the 

•

P

 button.

Link status

To enable manual IP setting -

Select the IP mode option.

•

Select the ‘Manual’ option 

•

on the IP mode menu.

The  lines  required  for 

•

manual  IP  entry  can  now 

be selected for editing. 
Scroll  to  each  line  in  turn 

•

that you want to change.
Press the 

•

ENTER button to 

open  a  dialogue  box  for 

number entry.

scroll  between  boxes  with  the 
O

 or P button.

When  you  have  finished 

•

entering the setting, scroll 

down to select OK.

Example of entering 

an IP address

Press the 

•

P

 button.

Select  the  ‘Wired’  option 

•

on this screen.

Select the IP mode option.

•

Select the ‘Dynamic’ option 

•

on the IP mode menu.
Scroll  down  and  select 

•

‘Apply’ to save this setting 

and leave this menu.