North Star COOLPIX S205 Guida Utente

Connecting to a Computer

Con

n

e

cti

ng t

o

 Te
le

vi

sion
s, C

o

mputers and 

Pri
n

ters

B

• The battery cannot be charged, nor can data be transferred, when the camera is connected to a 

computer before the camera’s date and time have been set (

A 18). If the camera’s clock battery 

A 130) has been exhausted, the date and time must be reset before the battery can be charged 

or images can be transferred with connection to a computer. In this case, use the Charging AC 
Adapter EH-68P (

A 14) to charge the battery and then set the camera’s date and time.

• If the camera is turned off, charging will also stop.

• If a computer enters sleep mode while charging, charging will stop and the camera may be turned 

off.

• When disconnecting the camera from a computer, turn the camera off and then disconnect the 

USB cable.

• It may take longer to charge the battery with connection to a computer than with charging using 

the Charging AC Adapter EH-68P. Charging time increases when image are transferred while the 
battery is charging.

• When the camera is connected to a computer, an application installed on the computer, such as 

Nikon Transfer, may start. If the camera was connected to the computer for the sole purpose of 
charging the battery, exit the application.

• The camera turns off automatically if there is no communication with the computer for 30 minutes 

after the battery has finished charging.

• Depending upon computer specifications, settings, and power supply and allocation, it may be 

impossible to charge the battery inserted into the camera via computer connection.