Newcon Optik DN140M Manuale Utente

Pagina di 8
The image should be restored in within 2 minutes. 
Poor atmospheric conditions such as fog, haze or extremely dark 
environments, will decrease the visibility distance of the unit. 
 
9. WARRANTY:
 
NEWCON OPTIK warranties this product against defects in material 
and workmanship for one year from the date of the original consumer's 
purchase, but no more than 18 months from the date of manufacturing.  
Should your NEWCON product prove defective during this period, 
please bring the product securely packaged in its original container or 
an equivalent, along with proof of the date of original purchase, to 
your NEWCON Dealer.  NEWCON will, repair (or at its option 
replace), the product or part thereof, which, on inspection by 
NEWCON, is found to be defective in materials or workmanship. 
 
What This Warranty Does Not Cover: 
NEWCON is not responsible for warranty service should the product 
fail to be properly maintained or fail to function properly as a result of 
misuse, abuse, improper installation, neglect, damage caused by 
disasters such as fire, flood, lightning, improper electrical current, or 
service other than by a NEWCON Authorized Service.  Postage, 
insurance, or shipping costs incurred in presenting your NEWCON 
product for warranty service are your responsibility. Please include a 
cheque or money  
order made out to NEWCON OPTIK for the amount of  US$15.00 to 
cover shipping and handling. 
 
 
NEWCON OPTIK may replace any product that has been 
discontinued or is out of stock, by another current product of 
comparable value and function. 
 
14 
 
1.  IMPORTANT INFORMATION 
 
Read prior to activation 
 
You have just purchased a complicated electronic 
device.  To operate it properly, please read this 
manual carefully.  Here are some common 
precautions that must be noted. 
 
• 
NEVER  disassemble the unit.  This device 
contains high voltage, which may be hazardous to 
your health!
 
 
• 
 NEVER expose the opened objective lens of an 
active unit in daylight.  (Note:  1st generation 
units will still remain active for a few minutes 
after switching the unit off).  During the day 
objective lenses must be covered by their caps.  
There is a tiny hole in the cap to provide enough 
light for daytime operation.  The unit can be 
turned on in the daytime, but again, caps must 
cover the lens.