NEC MDC3-BNDA1 Manuale Utente

English

Stand alone calibration can recalibrate the display without using a computer by the integrated front sensor or connecting an 
external sensor. There are 5 functions in STAND-ALONE CALIBRATION.

• 

Self Calibration: Calibrates the integrated front sensor based on the USB color sensor. Alternatively, manually adjust the 
integrated front sensor with an external near range color analyzer reference, which is traceable to a primary standards 
laboratory.

• 

Copy Calibration: Copies the luminance from one display to one or more additional displays.

• 

Gamma Adjust: Recalibrates Gamma data by the integrated front sensor. 

• 

DICOM Measurement: Measures DICOM response.

• 

AMBIENT SENSOR CALIBRATION: To manually adjust the integrated ambient light sensor with an external color analyzer 
reference, which is traceable to a primary standards laboratory. 

NOTE: 

Stand before proper Stand-Alone calibration can be performed, the display should warm-up for a minimum of 
30 minutes. If Stand-Alone calibration is started before the monitor is warmed up, a warning will appear on-screen 
(Figure A.1).

NOTE: 

Please only use an USB color sensor according to our specifi cation.
Refer to the KEY MAP (Figure A.2) to adjust the settings for calibration.
Stand-Alone calibration should be performed in either portrait or landscape orientation.

NOTE: 

To start calibration without a computer, perform the following steps.
When the “NO SIGNAL” message appears on screen, press the “LEFT” and then “RIGHT” buttons and hold them 
down simultaneously. The CALIBRATION menu will appear.

UP/DOWN: 

Changes from setting to setting

LEFT/RIGHT:  Changes the setting selection 
 

(ie...SELF or COPY)

SELECT: 

Moves to the next step of calibration

EXIT: 

Moves back one step of calibration