NEC NDA-30007-003 Manuale Utente
NDA-30007 Revision 3.0
Page 5
Conference Room Scheduler Installation Guide
Application Configuration
Step 3 – Facilities (Conf_Room_Sch only)
According to instructions in the APM Operations Manual, designate the
following NEAX2400 facilities for the Conf_Room_Sch component using the
Facilities command on the APM Configuration Entry screen:
following NEAX2400 facilities for the Conf_Room_Sch component using the
Facilities command on the APM Configuration Entry screen:
MRFI
Mode Release Facility (I)
MRFR
Mode Release Facility (R)
MSF
OAI Mode Set Facility
NTF
Number Transfer Facility
TCFD
Terminal Control Facility (D)
Note:
The same MSF identification number (i.e., from 128 to 192) that is selected in the
APM during Step 3 must be assigned to Conference Room Scheduler at the NEAX
MAT. For more information, see
APM during Step 3 must be assigned to Conference Room Scheduler at the NEAX
MAT. For more information, see
.
Step 4 – Secondary OAI Configuration Parameters (Conf_Room_Sch only)
Using the OAI-Conf command on the APM Configuration Entry screen, make the
entry shown for each of the following parameters required by Conf_Room_Sch.
Use the instructions provided for this option in the APM Operations Manual:
entry shown for each of the following parameters required by Conf_Room_Sch.
Use the instructions provided for this option in the APM Operations Manual:
Parameter
Entry
Definition
Database Name #1
/oai/db/cur/crminfofil
Indicates the path name of the database
containing the conference room
information. This name must be the
first listed database. The database
filename (i.e., crminfofil), listed here
with its path, should be used as the
name of the corresponding Application
Definition File (Refer to
containing the conference room
information. This name must be the
first listed database. The database
filename (i.e., crminfofil), listed here
with its path, should be used as the
name of the corresponding Application
Definition File (Refer to
Database Name #2
/oai/db/cur/crmidfile
Indicates the path name of the database
containing the employee identification
data. This name must be the second
listed database. The database filename
(i.e., crmidfile), listed here with its
path, should be used as the name of the
corresponding Application Definition
File (Refer to
containing the employee identification
data. This name must be the second
listed database. The database filename
(i.e., crmidfile), listed here with its
path, should be used as the name of the
corresponding Application Definition
File (Refer to
Timeout Value #1
90
Designates the number of seconds
Conf_Room_Sch will wait for user
input before it will release the D
Conf_Room_Sch will wait for user
input before it will release the D
term
.
Tenant Number
0
Specifies the number of the tenant that
Conf_Room_Sch serves.
Conf_Room_Sch serves.