Namco Bandai Games Welder 90500019 Manuale Utente
SAFETY WARNING
In Order to Use This Machine Safely
In order to use this machine safely, be sure to read this Operators Manual and the
Installation and Commissioning manual carefully before installation and use of the
machine.
machine.
Whenever the owner of this machine entrusts disassembly, installation,
adjustment, routine maintenance or trouble shooting to another person, the owner
should ensure that they read the appropriate precautions and relevant sections of this
manual before starting work.
should ensure that they read the appropriate precautions and relevant sections of this
manual before starting work.
In order that no accidents occur when the machine is in operation, strictly
follow the notes on safety described below. Also, carefully read section 3,
"Precautions".
"Precautions".
Warnings for Operation
NOTE:
Only operate this machine after checking that it has been installed correctly
and in accordance with the Installation and Commissioning manual.
and in accordance with the Installation and Commissioning manual.
NOTE:
Parts of this machine move during game play, so there are places where
the distance between the stationary section and moveable section changes.
There are warning stickers to keep hands and feet clear of moving parts,
however if the operator feels that a customer playing the game is in any
danger, he should warn the customer accordingly.
the distance between the stationary section and moveable section changes.
There are warning stickers to keep hands and feet clear of moving parts,
however if the operator feels that a customer playing the game is in any
danger, he should warn the customer accordingly.
NOTE:
The warning stickers must always be kept in good condition and replaced if
worn so that the customer can read them clearly.
worn so that the customer can read them clearly.
NOTE:
If there is an error or problem with this machine, operation must be
stopped immediately. (If the Drive Castor is worn out, it should be handled
according to section 6-9, "Handling Drive Castor Wear".)
stopped immediately. (If the Drive Castor is worn out, it should be handled
according to section 6-9, "Handling Drive Castor Wear".)
Warnings for Disassembly, Installation, Routine Maintenance and Troubleshooting
DANGER:
Namco Ltd. bears absolutely no responsibility for accidents or injuries
resulting from unauthorized changes to the machine.
resulting from unauthorized changes to the machine.
DANGER:
Ensure that the machine has been turned OFF before making adjustments
or carrying out maintenance. Also ensure only qualified personnel carry out
maintenance or turn the power ON to this machine.
or carrying out maintenance. Also ensure only qualified personnel carry out
maintenance or turn the power ON to this machine.
DANGER:
The power supply and inside the monitor will remain hot and have areas of
high voltage even though the machine has been turned OFF, and there is a
possibility of burns or electric shock. Be careful not to touch these areas.
high voltage even though the machine has been turned OFF, and there is a
possibility of burns or electric shock. Be careful not to touch these areas.
DANGER:
In order to avoid injuries due to mis-operation, be sure that the voltage of
the power supply is within the prescribed limits. Also to prevent possible
electric shocks due to failure, this machine MUST be fitted with a securely
connected earthed plug.
the power supply is within the prescribed limits. Also to prevent possible
electric shocks due to failure, this machine MUST be fitted with a securely
connected earthed plug.
NOTE:
Do not turn the main power switch ON until the machine has been installed
correctly.
correctly.