Maretron TLM100 Manuale Utente

There is one connection point (see Figure 6) for the TLM100: the NMEA 2000

®

 connection. 

Please refer to Section 2.5.1 for making NMEA 2000

®

 connection. 

 

 

 

The Maretron TLM100 provides a connection to an NMEA 2000

®

 interface through a five pin 

male connector (see Figure 7). You connect the TLM100 to an NMEA 2000

®

 network using a 

Maretron NMEA 2000

®

 cable (or an NMEA 2000

®

 compatible cable) by connecting the female 

end of the cable to the TLM100 (note the key on the male connector and keyway on the female 
connector). Be sure the cable is connected securely and that the collar on the cable connector 
is tightened firmly. Connect the other end of the cable (male) to the NMEA 2000

®

 network in 

the same manner. The TLM100 is designed such that you can plug or unplug it from an NMEA 
2000

®

 network while the power to the network is connected or disconnected. Please follow 

recommended practices for installing NMEA 2000

®

 network products.