Manhattan Computer Products 179119 Manuale Utente

CE 

This equipment is in compliance with the requirements of the following 

regulations: eN 55022 Class B (2006); eN 55024 (1998+A1:2001+ 

A2:2003), (IeC/eN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]). 
C-Tick 

This equipment is in compliance with the requirements of the following 

regulations: eN 55022 (2006) Class B, AS/NZS CISPR22 © IeC: 2005. 
VCCI 

This equipment is in compliance with the requirements of the following 

regulations: CISPR22 © IeC: 2005. 

Installing the device driver enables your computer’s operating system 

to recognize the Hi-Speed USB 2.0 SVGA Converter once it’s connected. 

Check your operating system and refer to the appropriate installation 

procedure below to begin installing the device driver. IMPORTANT: 

•  Unplug the Hi-Speed USB 2.0 SVGA Converter from your PC or  

  notebook before executing any setup or un-install program. 

•  Make sure you connect the display device to the VGA (dB15)  

  connector of the Hi-Speed USB 2.0 SVGA Converter and switch it 

  on before plugging the converter into an available USB 2.0 port on 

  your PC or notebook. 

 2000/XP 

 

1. Insert the enclosed driver Cd into the Cd-RoM drive. The setup 

  program should be launched automatically; if not, go to Start, then 

  Run, and then double-click “d:\Setup.exe” (where d: is the path of 

  your Cd-RoM drive). 

2. 

When the InstallShield 

  Wizard welcome screen  

  displays, click “Next” to  

  continue. 

3