Luxeon D315M Manuale Utente



 Digital Projector User’s Guide 

 

a. Computer 
b. Projector 
c.  Audio Source (if different from your video source or computer). 
d. Video source (such as VCR, DVD, HDTV). 

 
2.  Press the Power button on the top of the unit or remote control to turn off 

the power.   
A confirmation request will appear on the screen asking for reconfirmation of power off 
request.  

 
3.  Press the Power button again to confirm. 

The lamp will turn off immediately but the fan will continue running for 1 minute to cool 
down the unit. The Power Indicator will continue flashing as long as the power cord is 
connected to the projector. 

 
 

To restart the unit shortly after powering off, user must wait for 1 minute for the lamp to cool 
down.    The lamp ready LED will stop flashing when the projector is ready to power up. 

The unit may remain HOT for up to 45 minutes upon power off.    User should be 
careful before handling the unit to prevent any burn or injury. 
 

To reduce the risk of electric shock or damage to the equipment:   

• 

Do not disable the power cord-grounding plug. The grounding plug is an important 
safety feature. 

• 

Plug the power cord into a grounded (earthed) electrical outlet that is easily 
accessible at all times. 

• 

Disconnect power from the projector by unplugging the power cord from the 
electrical outlet. 

• 

Do not place anything on top of power cords or cables. Arrange them so that no 
one may accidentally step on or trip over them.   

• 

Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp 
the cord by the plug.