Hughes AN6-098P Manuale Utente

 

The antenna kit for each radio type is shipped in two boxes, as 
shown in Figure 2. The radio assembly is shipped separately. As 
soon as possible, unpack and inspect the antenna parts and 
hardware to make sure all parts have been received in good 
condition. 

Each main part is illustrated in the following sections, and the 
small hardware parts are listed in Table 2 and Table 3 on page 19. 
If any parts appear to have been damaged in transit, immediately 
contact the freight carrier. If any parts appear to be missing or 
damaged but not as a result of handling in transit, contact your 
dealer or distributor. 

Figure 2:  Shipping container contents—main components

T0172017

The feed support tube and feed rods in the
two antenna kits, for the J-type or cradle-
type radio, are not interchangeable.

(2 boxes)

Az/El and reflector

bracket assembly
Feed horn
Radio mounting adapter

Radio mounting brackets
Waveguide transition

(attached to feed horn)

Included in kit for J-type radio only:

Antenna reflector

Feed support tube
Feed rods

Not part of the antenna kit

J-type or cradle-type

Small hardware parts such as fasteners are also 
included in the boxes, as detailed in Tables 2 and 3.